DC Digital

Wireless DC-10 T-DN’s Used For Stage Production In Billy Elliot The Musical

admin — Wed, 19 Oct 2011 17:10:00 +0000

We created a special edition clock that will be used throughout the Billy Elliot The Musical Tour. We took our DC-10 T-DN and modified it for the set’s specific needs. They are using the down timer in order to get the cast and the stage hands to where they need to be exactly when they need to be there. The clocks are wireless and small so they will not be noticed on stage. The wirless option gives the crew the ability also to control all of the clocks that the cast needs from one master clock that transmits to the other four that they have. This also features a battery pack that we connected to the back of the timer that will enable it to have power through the entire show (and more of course). These timers are easily portable which makes them available for every show on the tour. If this product could be useful for anything you may need, let us know!

Project or Event Countdown Clocks

admin — Wed, 05 Oct 2011 19:27:48 +0000

DC-Digital features a line of project or event countdown timers. These clocks can be utilized for many occassions. We have sold the products to such customers as The Ohio State University and Michigan as countdowns to the game where they play each other (which the clocks featured the ability to reset the countodwn so it can be reused). We have sold it as a countdown to the expected completion of certain contruction deadlines. Many grand openings have also featured our large countdown timers that can range in digit sizes of 4″, 6″, 8″, 15″ and 30″ digits. The visibility range can reach up to 400 ft. Our countdown clocks have white vinyl lettering that show the 9 display digits as days, hours, minutes and seconds and if it is neccessary we can allow the clocks to countdown from over 2-years (999 days). We can make the product available for indoor or outdoor use also which extends the possibilities for what can be done with the countdown timers. We have the 4, 6 and 8 inch available for indoor and the 6, 8, 15 and 30 inch available for outdoor. Click here for all of the clock specifications and remember that we can customize them to fit your needs. We want to hear any ideas that our readers may have for the timers so contact us and let us know what you think!

DC-609

DC-80 T-DN or T-UP Timers With Motion Sensors

admin — Thu, 25 Aug 2011 19:48:15 +0000

DC-Digital is offering products of multiple uses! The featured product that I am speaking of today is a DC-80 complete with motion censors. This may be used in many fashions including as an up-timer or down-timer. The motion censor works with the funtions of the clock. When the lazer connecting the two is broken it can either start or stop time. This can come in handy on a conveyer belt or for many other functions. The product can be used indoor, but also can be completed for outdoor needs. It has a viewing range of 400 ft. and is wireless! The four digit display can be adjusted for the time that you are wishing to keep, including hours, minutes, seconds and tenths of a second. For more information check out the specifications sheet or contact us to see if this product is right for you!

DC-256 Wireless Universal Timers For The Arkansas Razorbacks

admin — Tue, 23 Aug 2011 18:14:34 +0000

The Arkansas Razorback’s football team has recently purchased 15 DC-256UTW Wireless Universal Timers. These clocks have multiple funtions including, up-time, down-time and may be used as a regular clock. The display feautures 2.3 inch, extra-bright digits and it is blacked out all around for maximum visibility (which makes it look great also!). There are six digits allowing the timer to count hours, seconds and minutes and has a visibility range of 200ft. The wireless feature comes with a WRC-8 remote that has a range of 125 feet. The Razorbacks plan to put these clocks all around their facilities for multiple different uses. DC-Digital offers these wireless functions on a multitude of our products. Click here for the specifications on this item.

DC-40 UT’s For Lockheed Martin

admin — Fri, 19 Aug 2011 12:00:24 +0000

We are proud to say that we were able to distribute to a company that helps out our U.S. Military! Lockheed Martin ordered 3 DC-40UT Universal Timer’s recently. With the availability in our stock, we were able to send these out to them the next morning. Our normal shipping time is around 3 days. Lockheed Martin provides technological resources to our military and we proudly support them. We were honored to be able to participate in any way possible, even if it is just allowing them to know what time it is!

Custom Timers With Multiple Options!

admin — Fri, 19 Aug 2011 11:25:11 +0000

DC-Digital has just sent out a fairly original order. The customer purchased six stadard DC-40 up-timers… but in pieces! They plan to put them together in their own manner rather than use our cases. The order came complete with 6 DC-40 boards that contain three digits, so he timer can count up to 999. It has 12 pig-tailed buttons that their will run through on there own. Also, it came with 6 red lenses for their display and 6 ready-to-use, 15 volt power supplies. We really like the idea of selling these individul pieces that allow the customer to be creative on their own with the product they are wanting. We can work with this and do it any way that you see fit. Contact us soon and we can see what we can put together!

Days Without Accident Timers

admin — Tue, 16 Aug 2011 14:07:49 +0000

Norfolk Southern’s Conway Locomotive Shop has recently purchased a Days Without An Accident Timer. This timer features sections counting up for days, hours, minutes and seconds. It will count up to 9,999 days. The display is Norfolk Southern’s own design that we put infront of our digits. The timer is 3 feet tall and 4 feet wide with a visibility range of 200 feet. Not only do these timers allow industries to keep track of their injury reports, but it also is a way of motivtating employees to be safer and to remind them of the good job they are doing. In keeping an employee motivated and happy, more production comes too! These custom designs can be used for other things too such as counting down to certain events or keeping track of production. Contact us and we can discuss how you can use this product!

Commercial Industrial Countdown Timer (DC-10)

admin — Fri, 12 Aug 2011 12:12:44 +0000

A recent purchase was made of one of our most original products. It is our standard DC-10 clock, but cumstomized to meet the customer’s important needs. The clock meets IP 66 and Nema 4, 12 and 13 ratings! It is made out of polycarbonate which carries a U.L. flammability rating of UL94 V-0 at 3mm and is UV stabilized which makes it great for outdoor use. The gasket is factory poured using high temperature, U.L.-listed, silicone rubber. The gasket’s lid is composed of a two piece “tongue and groove” construction that provides protection against access of oil, dust, water, etc… We can alter this clock to simply be a clock, to be an up or down timer, or any other specifications that you may need! The most intriguing thing I feel about the clock is the way DC-Digital managed to make it so useful and still maintain a modern, stunning appearance. The smoked, trasparent lid allows maximum visibility into the entire clock and looks very unique surrounded by the white case. We are very interested in working with these timers/clocks. Contact us and we can see what we can do with them!

Scoreboard Installation

admin — Tue, 09 Aug 2011 11:34:57 +0000

DC-Digital can provide services with scoreboards. We do many of these a year. We order the scoreboard through another company and we do the installation ourselves. We have recently put up scoreboards at Wilmington College and for Talawanda’s brand new high school in Oxford, Ohio. If it is for a scoreboard outside, we can go as far as you need including placing the beams in the ground for the board. The scoreboards range in all sizes and colors. The boards feature super bright LED’s so you do not have to worry about changing bulbs! The score boards are also completely wireless allowing them to be controlled from basically anywhere! We build play-clocks also! These we do ourselves. Contact DC-Digital and let us know how we can help you out today!

Large Time Zone Display From DC-Digital

admin — Fri, 05 Aug 2011 14:25:43 +0000

Global Training and Logistics has purchased a DC-40TZ-5. This is a large 86 inch wide clock that keeps 5 different time zones. It features red, 4-inch displays for all the time zones and can switch from 12 to 24 hour mode. It is hand-crafted and has a beautiful display. The viewing range is up to 200 feet. The lettering is 2-inch white vinyl. We can work with your specifications on these and can use any time zone you see fit! Contact us and let’s see how we can work together to build your own time zone! To see all of the specifics on this clock… Click Here.